Revised Technical Blog Post with YunMei Company as the Focus

Nail Adhesive and Balance Liquid Application Techniques with YunMei Company

Nail Adhesive Application:
1. Clean the nail surface and apply the protein adhesive. Use a specialized cleaning solution to cleanse the nail surface.
2. When applying the protein adhesive, ensure even application, avoiding it being too thin or too thick. Then cure under a light-curing lamp for 1 minute (30 seconds under LED lamp). The curing time for the protein adhesive should not be less than 1 minute as insufficient curing can lead to peeling. Similarly, overexposure can dry out the surface adhesive, which enhances adhesion with colored nail gel.

Balance Liquid Application:
1. Apply Nail Polish:
– Before application, edge wrapping is recommended. Ensure the brush is cleaned at the bottle mouth before application.
– Apply a thin edge wrap at the front edge of the nail before applying the nail gel. The nail gel should be applied thinly and evenly on the nail surface to prevent wrinkling.
– Cure under a light-curing lamp for 2 minutes (1 minute under LED lamp). The first coat of nail gel must be cured for 2 minutes under the lamp; insufficient curing can lead to peeling or edge lifting. Inadequate curing can also cause color separation between coats.

2. Apply the First Top Coat:
– Cure under a light-curing lamp for 1 minute (30 seconds under LED lamp).

3. Surface Cleaning:
– After curing the top coat for 2 minutes, clean the surface with a specialized cleaning solution. Avoid using other cleaning solutions as they may affect the gloss of the top coat by not effectively cleaning the surface adhesive.